Benelabo’s powder processing line controls particle size from 1–30 μm (jet mill) down to D90 5 μm (pin mill) and up to 2,500 kg/h (hammer mill) — with a twin-screw feeder that moves powders other systems cannot: light, fluffy, poor-flowability APIs from 20 g per batch.
Equipment Lineup
| Equipment | Key figures | Page |
|---|---|---|
| Jet Mill MC series | 1–30 μm · 0.035–250 kg/h | Jet Mill |
| Pin Mill FSZ series | D90 5 μm · up to 2,000 kg/h | Pin (Needle) Mill |
| Hammer Mill FSJ series | 25–200 μm · up to 2,500 kg/h | Hammer Mill |
| Centrifugal Sifter SFJ | 30–300 kg/h delumping | Centrifugal Sifter |
| Mobile Granulator ZLJ | 8 models · lines with granulators and fluid beds | Mobile Granulator |
| Twin-Screw Feeder SFS | from 20 g/batch · linear conveying | Twin-Screw Powder Feeder |
| S-LAB Lab Machine | five processes · one 0.75 kW bench | S-LAB Lab Machine |
Selection Guide
- Below 30 μm, brittle or heat-sensitive → Jet Mill
- 5–300 μm with throughput → Pin Mill
- Coarser cuts, fibrous or hard material → Hammer Mill
- Delumping and sizing → Centrifugal Sifter or Mobile Granulator
- Fluffy, cohesive, electrostatic feeds → Twin-Screw Feeder
- One machine for all lab duties → S-LAB
Not sure which mill?
Send a sample — the particle size distribution report settles the debate.